Exposed brick interiors and facades
Preparation can reveal the colour and texture of existing brickwork in warehouses, commercial buildings and suitable residential projects. Internal walls, external facades and architectural details are reviewed individually, with attention to wall condition, access and the intended appearance.
Brick and mortar respond differently
A wall contains materials with different strengths and exposure histories. Hard brick faces may sit beside softer mortar, replacement bricks or repaired joints. The preparation method is selected with those differences in mind, and changes in condition are reviewed as the work progresses.
Set the removal target with a sample
A test area establishes how much paint can be removed, the resulting texture and any coating remaining in pores or joints. It gives the client a realistic finish reference before production. Where the building has different brick types or coating histories, additional samples may be appropriate.
Conservative paint removal
The practical aim is the agreed removal target without unnecessary loss of sound masonry. Deeply absorbed paint and stains may remain if more aggressive treatment would damage the brick face or mortar. That balance is discussed during sample review rather than promising a uniformly new appearance.
Wet blasting and residue management
Water can help reduce airborne dust where wet preparation is appropriate. The work still requires protection, recovery arrangements and attention to where water and residue can travel. Site access, ventilation, drainage and neighbouring finishes are considered in the methodology.
Heritage features and adjacent materials
Decorative brick details, sandstone, windows and other sensitive elements require individual review. Heritage restrictions or approvals are identified before the scope is confirmed. Preparation cannot replace structural masonry repairs, and any separate repair or repointing requirements are brought to the client’s attention.
Cleanup and handover
The quotation identifies the agreed recovery of abrasive and coating residue, plus any wet scraping or pressure-wash cleanup. Fine cleaning beyond the immediate work area is separately defined. The exposed surface is reviewed against the sample, with remaining defects and follow-on work discussed at handover.
Information for a brickwork quote
Provide overall wall photographs and close-ups of coating, joints and repairs. Include the approximate area, wall height, location, access constraints and intended finish. Tell us about occupied areas, heritage requirements and any planned repointing or subsequent coating work.