0449 729 797sales@sandblastsydney.com.au
Sydney · On-site and workshop

Prepare the surface.
Protect the asset.

Industrial abrasive blasting, remedial surface preparation, protective coatings and decorative finishes across Sydney. On-site and in-house capability with inspection support for specified coating work.

Abrasive blastingProtective coatingsDecorative concreteCIP inspectors
01 / INDUSTRIAL

Asset preparation & protection

Steel structures, equipment and plant prepared for specified coating systems, on site or at our Austral workshop.

02 / ARCHITECTURAL

Concrete & surface finishes

Exposed aggregate, coating removal and stencil artwork across suitable concrete, timber and brickwork.

03 / QUALITY

Inspection-led delivery

CIP inspectors can support agreed hold points, measurement and reporting for coating projects.

What we do

The right preparation for every surface.

Explore our services below. We work on site and at our Austral facility, selecting the preparation and finish to suit the project.

Aeroblast steel abrasive blasting project
01 / SERVICE

Steel Abrasive Blasting

Abrasive preparation of steel to the specified cleanliness and profile, on site or at our Austral workshop.

Learn more
Aeroblast protective coatings project
02 / SERVICE

Protective Coatings

Specified industrial coating systems with controlled preparation, application and inspection.

Learn more
Aeroblast power tool preparation & brush/roller coatings project
03 / SERVICE

Power Tool Preparation & Brush/Roller Coatings

Localised mechanical steel preparation followed by controlled brush and roller coating application.

Learn more
Aeroblast ampp cip coating inspection project
04 / SERVICE

AMPP CIP Coating Inspection

Project-specific coating inspection, ITP hold points and documented checks through preparation, application and handover.

Learn more
Aeroblast confined space abrasive blasting & coating project
05 / SERVICE

Confined Space Abrasive Blasting & Coating

Internal surface preparation and protective coating for suitable tanks, vessels and enclosed assets, with project-specific entry planning and inspection.

Learn more
Aeroblast in-house abrasive blasting & protective coatings project
06 / SERVICE

In-House Abrasive Blasting & Protective Coatings

Workshop abrasive blasting and protective coating of suitable transportable items at Austral, from preparation through inspection and collection.

Learn more
Aeroblast concrete project
07 / SERVICE

Concrete

Exposed aggregate finishes, coating removal and abrasive preparation of concrete to the specified Concrete Surface Profile (CSP) for coating application.

Learn more
Aeroblast decorative concrete & stencil artwork project
08 / SERVICE

Decorative Concrete & Stencil Artwork

Custom graphics, patterns, lettering and logos blasted into suitable surfaces using approved stencils.

Learn more
Aeroblast timber blasting & restoration project
09 / SERVICE

Timber Blasting & Restoration

Controlled coating removal and surface preparation for timber ceilings, beams, trusses and architectural features.

Learn more
Aeroblast brickwork & masonry blasting project
10 / SERVICE

Brickwork & Masonry Blasting

Sample-led paint removal and surface restoration for brick walls, facades and suitable masonry.

Learn more
Our approach

From first enquiry to final handover.

A nine-stage process for defined scopes, controlled preparation and coating work, and inspection records where specified. The documents and hold points are scaled to the project.

01

Enquiry & review

We review the asset, location, access, existing condition, drawings and any coating specification. A site inspection or photos help define the work and identify constraints.

02

Scope & quotation

We set out the proposed preparation method, coating system or finish, inclusions, access, containment, cleanup limits and assumptions in a project-specific quote.

03

Methodology, SWMS & ITP

For specified work we prepare a methodology and Safe Work Method Statement, then agree an Inspection and Test Plan with the client. The ITP identifies checks, acceptance criteria, records and hold or witness points.

04

Mobilise & protect

Before work starts, we confirm site access, isolate the work area as agreed, protect adjacent assets and establish the containment and recovery controls appropriate to the site.

05

Pre-start checks

The team checks the substrate, abrasive and equipment. For coating work, specified ambient readings and condensation risk are recorded before preparation or application proceeds.

06

Surface preparation

We blast, wet blast or use power tools to the agreed target. On steel, visual cleanliness and surface profile are checked against the coating specification; decorative surfaces are compared with the agreed sample.

07

AMPP CIP inspection & release

Where included in the ITP, AMPP Coating Inspector Program (CIP) inspectors verify preparation and documented hold points before coating. Any area that does not meet the agreed criteria is addressed and rechecked.

08

Coating application

The specified primer, intermediate and finish coats are applied within the manufacturer’s conditions and recoat windows. Edges, welds and corners receive stripe coating where required; wet film thickness is monitored during application.

09

Final QA & handover

After cure, agreed visual and dry film thickness checks are completed. We close out records, address defects within scope, demobilise and hand over the inspection package required by the project.

Our work

Projects from the field.

A selection of our preparation, restoration and coating work. Select a photo to see the detail.

Finished steel assembly
Finished steel assembly
Exposed timber roof trusses
Exposed timber roof trusses
Exposed brick interior
Exposed brick interior
Architectural concrete pavement
Architectural concrete pavement
Patterned concrete courtyard
Patterned concrete courtyard
Coated steel components
Coated steel components
Quality & inspection

Specified work. Verifiable results.

Our coating projects can include agreed inspection and test points with CIP inspectors. The project specification, coating manufacturer data sheets and substrate determine the acceptance criteria. Agreed records may cover abrasive condition, cleanliness, surface profile, climatic readings, stripe coats and coating thickness.

Inspection points

From blast to final coat

Visual cleanliness, surface profile, ambient conditions, wet film thickness and dry film thickness can be checked and recorded where required by the project ITP.

AMPP CIP Coating Inspection
AS 1627.4Abrasive blast cleaning of steel before coating.
AS/NZS 2312.1Guidance for protection of structural steel against atmospheric corrosion.
AS/NZS 3894Relevant site testing methods for protective coatings, including profile, climate and film thickness checks.
ISO 8502-4 & ISO 8503-5Condensation risk assessment and replica tape profile measurement when specified.

Standards apply to relevant steel and protective coating work. Decorative concrete, timber and masonry finishes are assessed against their project requirements and agreed visual reference.

Start a conversation

Tell us what needs work.

For a quote, include the surface, approximate size, suburb, desired finish and any photos you have. We can help narrow down the preparation and application method.